Profit mode
Tell the miner what electricity costs. It shows cost and profit per card and picks the most profitable power limit.
Set your tariff
In armadig.conf, one setting per line:
wallet = YOUR_PEARL_WALLET, YOUR_QTC_WALLET
tariff = 23-7 4.33, 7-23 9.63 rub
psu = gold, 1200w
power = auto
tariff: up to three zones in the computer's local time, with the price per kWh. The currency goes anywhere on the line (usd,eur,rub, ...).23-7crosses midnight. One price with no hours is the whole day. Example for Germany:tariff = 23-7 0.30, 7-23 0.38 eur.- The price is static, exactly as you wrote it. Only the exchange rate of your currency is checked live (several public sources, median).
psu: power supply class (bronze silver gold platinum titanium) and rated watts, any order; or an efficiency such as92%.power:auto(the limit that earns the most in each zone, default),efficiency(most hashes per wall watt),off,redo, or one limit such as80%or150w.power_max_loss = 10%: safety rail, 0 to 50. It never picks a limit that lowers a card's hashrate by more than this. It is not a money threshold.
Prefer no file? The same on the command line, for example in a flight sheet:
armadig-miner PEARL_ADDRESS QTC_ADDRESS platinum,1200w 6.50 rub 23-07 9.65 rub 07-23
That is a Platinum 1200 W supply and two zones in roubles: 6.50 per kWh from 23:00 to 07:00, 9.65 from 07:00 to 23:00. See the one-line form.
Wall power without a meter
The miner estimates the rig's power at the wall itself: per card, the GPU power reading times its sensor factor, plus 30 W for the rest of the rig, divided by the PSU efficiency. The factor is 1.00 for NVIDIA and RX 9000, 1.20 for RX 7000 and 1.33 for RX 6000. You need no wattmeter. If you own one, wattmeter = 346w@299w (wall reading @ the GPU power sum the miner shows) fits the estimate to your rig.
What the window shows
Armadig Miner Pearl POOL_HOST:PORT 02:14:05 ===== === up 38m user effort 97% ==================================== # MODEL coin hashrate A+R+S C W/wall rev/day prof/day ----------------------------------------------------------------------------- 0 RTX 4060Ti Pearl 101.37 TH/s 38+0+1 61C 163W/249W $3.24 $2.81 1 RTX 5060Ti Pearl 106.21 TH/s 38+0+1 61C 167W/249W $3.24 $2.81 sum Pearl 207.58 TH/s 330W/498W $6.48 $5.62 pool 204.58 TH/s PL 90-100% fan 48% PROFIT MODE day 9.63 RUB/kWh gpu1 PL 90% -10% hashrate -1.7%, cost -$0.09/day, profit +$0.03/day ===== === 15m 207.3 DEV realised 0.760% dev shares 4 dev effort 95% ========
Console view. The numbers are illustrative, your rig will show its own.
Money is net of the dev fee, the pool fee, rejected and stale shares and the selling cost, in USD(T). A card that costs more than it earns is shown unprofitable; the miner does not stop it. On a window of 120 or more columns, key P prints a card's power profile (per tariff zone: limit, card and wall power, hashrate, revenue, cost and profit per day).
The power-limit search
- Each card first mines 5 minutes at its start limit (the baseline).
- Then it measures rate and power at a few limits once: 100, 90, 80, 70, 60 % of the factory limit and points around the best, about 6 minutes, mining all the time.
- For each tariff zone it sets the limit with the highest profit after electricity, then checks the choice by measurement in 5 % steps.
- The curve is stored in
armadig_power.txtnext to the program and reused. A driver, kernel or program change, a live rate more than 3 % off the curve, or a week, measures it again (--power-search redodoes it now).
Switch it off
--power-search off no automatic power limit
--power-limit 80 one fixed limit for every card (80 % of factory), or 150W
--fixed everything automatic off (no coin switching, no power search, no market requests)
Use --fixed whenever you measure or compare hashrates.